Pallet Loading Guide
How many pallets fit in a 20ft and 40ft container, what sizes the common pallet types come in, when you can double-stack them, and which standard export pallets must meet.
- 40ft, Euro pallet
- 23 pallets
- 40ft, Industrial pallet
- 20 pallets
- 20ft, Euro pallet
- 11 pallets
- 20ft, Industrial pallet
- 9 pallets

How many pallets fit in a 20ft and 40ft container?
The pallet count depends on pallet size, container type and load height. The figures below allow a 2 cm loading gap between pallets. The diagrams show the layout from above.
20ft container
- Internal floor area
- 13.9 m² (149 ft²)
- Euro pallet 120×80, single tier
- 11 pallets
- Double-stacked (pallets up to 1.17 m)
- 22 pallets
40ft container
- Internal floor area
- 28.3 m² (304 ft²)
- Euro pallet 120×80, single tier
- 23 pallets
- Double-stacked (pallets up to 1.17 m)
- 46 pallets
Pallet types and standard sizes
The six most common pallet sizes in international shipping and how many of each fit in a single tier.
A 40ft High Cube has the same floor as a standard 40ft, so it takes the same number of pallets in a single tier. Packed with no gaps, a 40ft can take up to 25 Euro or 22 industrial pallets.
20ft vs. 40ft vs. High Cube for palletised cargo
Loading is based on internal dimensions, not external ones.
Double-stack heights leave 5 cm of clearance under the roof for the forklift. With double-stacked cargo, weight usually runs out before space does; see “Double-stacking pallets”.
Euro pallet vs. American pallet
Load capacity depends on build quality; figures are typical manufacturer values.
Racking capacity is lower than both; for a Euro pallet it is typically around 1,000 kg. Before loading heavy goods, check the pallet manufacturer's spec sheet.
Double-stacking pallets
Double stacking can double your capacity, as long as three things allow it.
Double-stacking requirements
- Height: Each loaded pallet is at most 1.17 m in a standard container and 1.32 m in a High Cube.
- Load bearing: The bottom pallet's cargo must carry the weight of the top pallet; weak cartons or fragile goods don't go underneath.
- Flat top: The top of the bottom pallet is flat and even, so the upper pallet sits fully on it.
- Total weight: The combined weight of all pallets stays within the container's payload.
- Packaging: Both pallets are secured with shrink wrap and strapping.
Weight example
46 Euro pallets double-stacked in a 40ft container with a 26,730 kg payload:
600 kg per pallet
46 × 600 = 27,600 kg
Over the 26,730 kg payload
550 kg per pallet
46 × 550 = 25,300 kg
With double-stacked cargo, weight is usually the limit before space. The load calculator checks both at once.
ISPM 15 for wooden pallets

In international shipping, pallets and raw wood packaging must be heat-treated under ISPM 15 (at least 30 minutes at 56 °C at the wood's core) and carry the IPPC mark with the code HT. Many countries return shipments on unmarked pallets or charge for fumigation and disposal.
- Plastic, metal and engineered wood pallets (MDF, plywood, OSB) don't need the mark.
- If a pallet is repaired with untreated wood, its certification is no longer valid.
- Some countries also require a wood packaging declaration in addition to the mark; check the destination country's rules.
Pallet loading and securing tips
Most damage to palletised cargo comes from a few simple mistakes.
No overhang
Cargo hanging over the pallet edge crushes the edges and throws rows out of line; match the pallet size to the load.
Shrink wrap and straps
Shrink-wrap every pallet and strap heavy loads to the pallet; use cardboard edge protectors on the corners.
Heavy low and central
Put heavy pallets on the floor and in the middle of the container's length; each half of the container should carry 40–60% of the weight.
Secure empty space
Fill gaps up to 40 cm with airbags and larger gaps with timber bracing so pallets don't shift in transit.
Room for the forklift
Leave about 2 cm between pallets and 5 cm under the roof so a forklift can place and lift each pallet.
Sound, standard pallets
Broken pallets, or ones repaired with untreated wood, are less safe and may be rejected at destination customs.
Calculate your own pallet load
Enter your goods' dimensions, weight and pallet type; the calculator tells you items per pallet, pallet count, the right vehicle, weight distribution and the securing you need.

